apt-get install sshThis fetches openssh-server and a bunch of other stuff. When it is done I have an ssh command (client) available as well as openssh-server installed.
I edit /etc/ssh/sshd_config and tell it to listen to port 2222 rather than the default (22). I leave PasswordAuthentication alone.
service ssh startThis appears to start the ssh server (apparently WSL2 does not use systemd). And indeed if I "telnet x.y.z 2222" from the windows shell, it is responding.
I try this:
chkconfig --level 35 ssh onBut there is no chkconfig command.
apt-get install net-toolsThis gives me ifconfig, which is how I am used to finding out the ip assigned to WSL2 on the virtual network. It is 172.23.25.42, at least for now.
Settings, Update and Security, Windows Security, Firewall and network protection.
Select "advanced settings" and give admin password.
Select "inbound rules", then "new rule" on the right.
Select rule type "Port", hit "Next"
Select "specific local port" and enter 2222, hit "Next"
Select "allow connection" and hit "Next"
Leave Public, Domain and Private all checked, hit "Next"
Enter a name and description, hit "Finish"
I called my rule "WSL2 ssh".
Now type in this huge mess (this needs to go in a script).
netsh interface portproxy add v4tov4 listenport=2222 listenaddress=0.0.0.0 connectport=2222 connectaddress=172.23.25.42I put this into a BAT file, but of course this requires elevated privilege to run. So I fire up an admin power shell and type ./myssh.bat and it seems to take the command.
Poking around with netsh, I see deprecation warnings from Microsoft. They want you to transition to doing these sorts of things from the powershell and warn that they may remove netsh in the future.
Set-ExecutionPolicy RemoteSigned ./wsl.ps1I have no idea if this setting will persist or is only for this session.
The Script Exited, the ip address of WSL 2 cannot be foundThere is a lot of discussion here on starting sshd automatically in WSL:
https://gist.github.com/dentechy/de2be62b55cfd234681921d5a8b6be11Apparently the usual business of linux runlevels, chkconfig, init.d, systemd and all of that does not work as you might expect in WSL, so you have to monkey around with the "task scheduler" on the windows side of things.
Also, quite to my surprise, WSL starts up anew each time the user that installed it logs in. So "booting" from the point of view of WSL happens at each user login. Once we get ssh running, then it is just a matter of discovering our virtual IP number, splicing it into the following and issuing this command:
netsh interface portproxy add v4tov4 listenport=2222 listenaddress=0.0.0.0 connectport=2222 connectaddress=172.23.25.42
# Be sure ssh is running
SERVICE='ssh'
if ps ax | grep -v grep | grep $SERVICE >/dev/null
then
echo "$SERVICE service is running"
else
sudo /etc/init.d/ssh start
echo "$SERVICE service started"
fi
This gets the job done as far as starting sshd (though I do have to give my password each time).
While I am at it, I run /sbin/ifconfig -a to get the IP address for eth0 and write it down.
Then, on the windows side, what I do is to start a command prompt window (as user tom) and edit the file nsh.ps1 which looks like this:
iex "netsh interface portproxy add v4tov4 listenport=2222 listenaddress=0.0.0.0 connectport=2222 connectaddress=172.23.25.42";I edit in my correct IP number and save it. Then I launch an administrator powershell (need to give a password again). Then:
cd \Users\Tom ./nsh.ps1And this seems to get it done.
Tom's electronics pages / [email protected]