Here is the output when I ran the BBB-eMMC-flasher-debian-7.9-console-armhf-2015-10-30-2gb.img flasher image.
U-Boot SPL 2015.10-00001-g51aa16b (Oct 21 2015 - 14:16:21)
bad magic
U-Boot 2015.10-00001-g51aa16b (Oct 21 2015 - 14:16:21 -0500), Build: jenkins-github_Bootloader-Builder-260
Watchdog enabled
I2C: ready
DRAM: 512 MiB
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Net: not set. Validating first E-fuse MAC
cpsw
Hit any key to stop autoboot: 0
gpio: pin 53 (gpio 53) value is 1
switch to partitions #0, OK
mmc0 is current device
gpio: pin 54 (gpio 54) value is 1
Checking for: /uEnv.txt ...
1179 bytes read in 12 ms (95.7 KiB/s)
gpio: pin 55 (gpio 55) value is 1
Loaded environment from uEnv.txt
Importing environment from mmc ...
Checking if uenvcmd is set ...
gpio: pin 56 (gpio 56) value is 1
Running uenvcmd ...
1699 bytes read in 37 ms (43.9 KiB/s)
debug: [/boot/vmlinuz-3.8.13-bone79] ...
5644336 bytes read in 334 ms (16.1 MiB/s)
debug: [/boot/initrd.img-3.8.13-bone79] ...
2612247 bytes read in 167 ms (14.9 MiB/s)
debug: [/boot/dtbs/3.8.13-bone79/am335x-boneblack.dtb] ...
26118 bytes read in 69 ms (369.1 KiB/s)
debug: [console=tty0 console=ttyO0,115200n8 root=/dev/mmcblk0p1 rootfstype=ext4 rootwait init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh] ...
debug: [bootz 0x82000000 0x88080000:27dc17 0x88000000] ...
Kernel image @ 0x82000000 [ 0x000000 - 0x562030 ]
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Using Device Tree in place at 88000000, end 88009605
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.13-bone79 (root@a4-imx6q-wandboard-2gb) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Tue Oct 13 20:44:55 UTC 2015
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] AM335X ES2.1 (l2cache sgx neon )
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c0d5e000 s14080 r8192 d14592 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
[ 0.000000] Kernel command line: console=tty0 console=ttyO0,115200n8 root=/dev/mmcblk0p1 rootfstype=ext4 rootwait init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] allocated 1048576 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 511MB = 511MB total
[ 0.000000] Memory: 505532k/505532k available, 18756k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
[ 0.000000] .text : 0xc0008000 - 0xc080cef8 (8212 kB)
[ 0.000000] .init : 0xc080d000 - 0xc084a700 ( 246 kB)
[ 0.000000] .data : 0xc084c000 - 0xc08d4180 ( 545 kB)
[ 0.000000] .bss : 0xc08d4180 - 0xc094d940 ( 486 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:0 nr_irqs:0 0
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] Total of 128 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.000639] Calibrating delay loop... 993.47 BogoMIPS (lpj=969728)
[ 0.029187] pid_max: default: 32768 minimum: 301
[ 0.029332] Security Framework initialized
[ 0.029397] Mount-cache hash table entries: 512
[ 0.035159] Initializing cgroup subsys cpuacct
[ 0.035206] Initializing cgroup subsys memory
[ 0.035252] Initializing cgroup subsys blkio
[ 0.035347] CPU: Testing write buffer coherency: ok
[ 0.035739] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.035806] Setting up static identity map for 0x804da4c8 - 0x804da514
[ 0.036739] Brought up 1 CPUs
[ 0.036769] SMP: Total of 1 processors activated (993.47 BogoMIPS).
[ 0.037568] devtmpfs: initialized
[ 0.045867] omap_hwmod: wd_timer2: _wait_target_disable failed
[ 0.098012] pinctrl core: initialized pinctrl subsystem
[ 0.098165] rstctl core: initialized rstctl subsystem
[ 0.098460] regulator-dummy: no parameters
[ 0.098790] NET: Registered protocol family 16
[ 0.099319] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.104916] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 0.105543] platform 49000000.edma: alias fck already exists
[ 0.105575] platform 49000000.edma: alias fck already exists
[ 0.105597] platform 49000000.edma: alias fck already exists
[ 0.106313] OMAP GPIO hardware version 0.1
[ 0.108825] gpio-rctrl rstctl.4: loaded OK
[ 0.112173] No ATAGs?
[ 0.112196] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.113496] cpsw.0: No hwaddr in dt. Using 1c:ba:8c:f1:c9:bf from efuse
[ 0.113533] cpsw.1: No hwaddr in dt. Using 1c:ba:8c:f1:c9:c1 from efuse
[ 0.121750] bio: create slab at 0
[ 0.128056] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[ 0.128354] vmmcsd_fixed: 3300 mV
[ 0.129977] SCSI subsystem initialized
[ 0.130234] usbcore: registered new interface driver usbfs
[ 0.130318] usbcore: registered new interface driver hub
[ 0.130524] usbcore: registered new device driver usb
[ 0.131778] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 0.132782] input: tps65217_pwr_but as /devices/ocp.3/44e0b000.i2c/i2c-0/0-0024/input/input0
[ 0.134347] DCDC1: at 1500 mV
[ 0.135244] vdd_mpu: 925 <--> 1325 mV at 1325 mV
[ 0.136067] vdd_core: 925 <--> 1150 mV at 1125 mV
[ 0.136899] LDO1: at 1800 mV
[ 0.137700] LDO2: at 3300 mV
[ 0.139185] LDO3: 1800 mV
[ 0.140000] LDO4: at 3300 mV
[ 0.140737] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 0.141206] omap_i2c 44e0b000.i2c: unable to select pin group
[ 0.141674] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
[ 0.143106] omap_i2c 4819c000.i2c: unable to select pin group
[ 0.143269] media: Linux media interface: v0.10
[ 0.143342] Linux video capture interface: v2.00
[ 0.143420] pps_core: LinuxPPS API ver. 1 registered
[ 0.143435] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.143473] PTP clock support registered
[ 0.143879] Advanced Linux Sound Architecture Driver Initialized.
[ 0.144563] NetLabel: Initializing
[ 0.144589] NetLabel: domain hash size = 128
[ 0.144602] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.144677] NetLabel: unlabeled traffic allowed by default
[ 0.144852] Switching to clocksource gp_timer
[ 0.176320] NET: Registered protocol family 2
[ 0.176983] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.177082] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
[ 0.177172] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.177242] TCP: reno registered
[ 0.177263] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.177295] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.177531] NET: Registered protocol family 1
[ 0.177932] RPC: Registered named UNIX socket transport module.
[ 0.177958] RPC: Registered udp transport module.
[ 0.177972] RPC: Registered tcp transport module.
[ 0.177986] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.178324] Trying to unpack rootfs image as initramfs...
[ 0.356236] Freeing initrd memory: 2548K
[ 0.356570] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 0.356854] CPU PMU: attempt to register multiple PMU devices!
[ 0.356883] arm-pmu: probe of arm-pmu failed with error -28
[ 0.357201] omap2_mbox_probe: platform not supported
[ 0.508275] VFS: Disk quotas dquot_6.5.2
[ 0.508449] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.509206] NFS: Registering the id_resolver key type
[ 0.509294] Key type id_resolver registered
[ 0.509310] Key type id_legacy registered
[ 0.509590] fuse init (API version 7.20)
[ 0.510000] Btrfs loaded
[ 0.510207] msgmni has been set to 992
[ 0.511836] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.511876] io scheduler noop registered
[ 0.511891] io scheduler deadline registered
[ 0.511920] io scheduler cfq registered (default)
[ 0.513130] tps65217-bl tps65217-bl: no platform data provided
[ 0.513174] tps65217-bl: probe of tps65217-bl failed with error -22
[ 0.513705] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.515074] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[ 0.515368] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 72) is a OMAP UART0
[ 1.276575] console [ttyO0] enabled
[ 1.280893] [drm] Initialized drm 1.1.0 20060810
[ 1.293015] brd: module loaded
[ 1.299986] loop: module loaded
[ 1.303398] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 1.310634] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 1.317868] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 1.325090] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 1.332317] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 1.346275] bone-capemgr bone_capemgr.9: Baseboard: 'A335BNLT,000B,1514BBBK1303'
[ 1.354047] bone-capemgr bone_capemgr.9: compatible-baseboard=ti,beaglebone-black
[ 1.392978] bone-capemgr bone_capemgr.9: slot #0: No cape found
[ 1.430084] bone-capemgr bone_capemgr.9: slot #1: No cape found
[ 1.467192] bone-capemgr bone_capemgr.9: slot #2: No cape found
[ 1.504302] bone-capemgr bone_capemgr.9: slot #3: No cape found
[ 1.510526] bone-capemgr bone_capemgr.9: slot #4: specific override
[ 1.517092] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 4
[ 1.525106] bone-capemgr bone_capemgr.9: slot #4: 'Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G'
[ 1.535180] bone-capemgr bone_capemgr.9: slot #5: specific override
[ 1.541747] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 5
[ 1.549759] bone-capemgr bone_capemgr.9: slot #5: 'Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI'
[ 1.559736] bone-capemgr bone_capemgr.9: slot #6: specific override
[ 1.566311] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 6
[ 1.574332] bone-capemgr bone_capemgr.9: slot #6: 'Bone-Black-HDMIN,00A0,Texas Instrument,BB-BONELT-HDMIN'
[ 1.584743] bone-capemgr bone_capemgr.9: loader: before slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
[ 1.593592] bone-capemgr bone_capemgr.9: loader: check slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
[ 1.602405] bone-capemgr bone_capemgr.9: loader: before slot-5 BB-BONELT-HDMI:00A0 (prio 1)
[ 1.611164] bone-capemgr bone_capemgr.9: loader: check slot-5 BB-BONELT-HDMI:00A0 (prio 1)
[ 1.619830] bone-capemgr bone_capemgr.9: initialized OK.
[ 1.625407] bone-capemgr bone_capemgr.9: loader: before slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
[ 1.634238] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
[ 1.644417] OneNAND driver initializing
[ 1.649381] usbcore: registered new interface driver cdc_ether
[ 1.655535] bone-capemgr bone_capemgr.9: loader: after slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
[ 1.664336] usbcore: registered new interface driver rndis_host
[ 1.670593] bone-capemgr bone_capemgr.9: loader: after slot-5 BB-BONELT-HDMI:00A0 (prio 1)
[ 1.679251] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
[ 1.688060] usbcore: registered new interface driver cdc_ncm
[ 1.694004] bone-capemgr bone_capemgr.9: slot #4: Requesting firmware 'cape-bone-2g-emmc1.dtbo' for board-name 'Bone-LT-eMMC-2G', version '00A0'
[ 1.708017] usbcore: registered new interface driver cdc_acm
[ 1.713966] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.722342] Initializing USB Mass Storage driver...
[ 1.727464] bone-capemgr bone_capemgr.9: slot #4: dtbo 'cape-bone-2g-emmc1.dtbo' loaded; converting to live tree
[ 1.738137] bone-capemgr bone_capemgr.9: slot #5: Requesting firmware 'cape-boneblack-hdmi-00A0.dtbo' for board-name 'Bone-Black-HDMI', version '00A0'
[ 1.752289] usbcore: registered new interface driver usb-storage
[ 1.758571] USB Mass Storage support registered.
[ 1.763598] bone-capemgr bone_capemgr.9: slot #4: #2 overlays
[ 1.770245] bone-capemgr bone_capemgr.9: slot #4: Applied #2 overlays.
[ 1.777116] bone-capemgr bone_capemgr.9: loader: done slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
[ 1.785788] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
[ 1.794552] bone-capemgr bone_capemgr.9: slot #5: dtbo 'cape-boneblack-hdmi-00A0.dtbo' loaded; converting to live tree
[ 1.805893] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 1.812463] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[ 1.817696] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:480 dsps_musb_init: OK
[ 1.826998] bone-capemgr bone_capemgr.9: slot #5: #4 overlays
[ 1.834499] platform 4830e000.fb: alias fck already exists
[ 1.840453] musb-hdrc musb-hdrc.0.auto: *** mode=3
[ 1.845513] musb-hdrc musb-hdrc.0.auto: *** power=250
[ 1.851760] bone-capemgr bone_capemgr.9: slot #5: Applied #4 overlays.
[ 1.858660] bone-capemgr bone_capemgr.9: loader: done slot-5 BB-BONELT-HDMI:00A0 (prio 1)
[ 1.867247] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
[ 1.876458] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[ 1.881693] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:480 dsps_musb_init: OK
[ 1.890507] bone-capemgr bone_capemgr.9: loader: after slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
[ 1.899397] musb-hdrc musb-hdrc.1.auto: *** mode=1
[ 1.904433] musb-hdrc musb-hdrc.1.auto: *** power=250
[ 1.909723] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 1.915762] bone-capemgr bone_capemgr.9: slot #6: Requesting firmware 'cape-boneblack-hdmin-00A0.dtbo' for board-name 'Bone-Black-HDMIN', version '00A0'
[ 1.930301] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[ 1.938672] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.945796] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.953356] usb usb1: Product: MUSB HDRC host driver
[ 1.958551] usb usb1: Manufacturer: Linux 3.8.13-bone79 musb-hcd
[ 1.964837] usb usb1: SerialNumber: musb-hdrc.1.auto
[ 1.970074] bone-capemgr bone_capemgr.9: slot #6: dtbo 'cape-boneblack-hdmin-00A0.dtbo' loaded; converting to live tree
[ 1.981943] hub 1-0:1.0: USB hub found
[ 1.985926] hub 1-0:1.0: 1 port detected
[ 1.990240] bone-capemgr bone_capemgr.9: slot #6: BB-BONELT-HDMIN conflict P8.45 (#5:BB-BONELT-HDMI)
[ 1.999812] bone-capemgr bone_capemgr.9: slot #6: Failed verification
[ 2.006586] bone-capemgr bone_capemgr.9: loader: failed to load slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
[ 2.017137] mousedev: PS/2 mouse device common for all mice
[ 2.024066] lsm303dlhc_acc accelerometer driver: init
[ 2.029466] i2c-core: driver [lsm303dlhc_acc] using legacy suspend method
[ 2.036582] i2c-core: driver [lsm303dlhc_acc] using legacy resume method
[ 2.043727] lsm303dlhc_mag driver: init
[ 2.047823] lsm330_acc accelerometer driver: init
[ 2.052803] i2c-core: driver [lsm330_acc] using legacy suspend method
[ 2.059561] i2c-core: driver [lsm330_acc] using legacy resume method
[ 2.066231] lsm330_gyr: gyroscope sysfs driver init
-----------------------------
Starting eMMC Flasher from microSD media
Version: [1.20151007: gpt partitions with raw boot...]
-----------------------------
Checking for Valid bbb-eeprom header
Valid bbb-eeprom header found [335]
-----------------------------
copying: [/dev/mmcblk0] -> [/dev/mmcblk1]
lsblk:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
mmcblk1boot0 179:16 0 1M 1 disk
mmcblk1boot1 179:24 0 1M 1 disk
mmcblk0 179:0 0 7.4G 0 disk
`-mmcblk0p1 179:1 0 1.7G 0 part /
mmcblk1 179:8 0 1.8G 0 disk
`-mmcblk1p1 179:9 0 1.8G 0 part
-----------------------------
df -h | grep rootfs:
rootfs 1.7G 188M 1.4G 13% /
-----------------------------
Erasing: /dev/mmcblk1
108+0 records in
108+0 records out
113246208 bytes (113 MB) copied, 31.8748 s, 3.6 MB/s
108+0 records in
108+0 records out
113246208 bytes (113 MB) copied, 5.73743 s, 19.7 MB/s
Erasing: /dev/mmcblk1 complete
-----------------------------
Writing bootloader to [/dev/mmcblk1]
dd if=/opt/backup/uboot/MLO of=/dev/mmcblk1 count=1 seek=1 conv=notrunc bs=128k
-----------------------------
0+1 records in
0+1 records out
65620 bytes (66 kB) copied, 0.360186 s, 182 kB/s
-----------------------------
dd if=/opt/backup/uboot/u-boot.img of=/dev/mmcblk1 count=2 seek=1 conv=notrunc bs=384k
-----------------------------
0+1 records in
0+1 records out
317044 bytes (317 kB) copied, 0.172383 s, 1.8 MB/s
-----------------------------
Formatting: /dev/mmcblk1
sfdisk: [sfdisk from util-linux 2.20.1]
sfdisk: [sfdisk --force --Linux --in-order --unit M /dev/mmcblk1]
sfdisk: [1,,L,*]
Checking that no-one is using th[ 48.394388] mmcblk1: unknown partition table
is disk right now ...
OK
Disk /dev/mmcblk1: 58624 cylinders,[ 48.406891] mmcblk1: p1
4 heads, 16 sectors/track
sfdisk: ERROR: sector 3069441021 does not have an msdos signature
/dev/mmcblk1: unrecognized partition table type
Old situation:
No partitions found
New situation:
Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End MiB #blocks Id System
/dev/mmcblk1p1 * 1 1831 1831 1874944 83 Linux
/dev/mmcblk1p2 0 - 0 0 0 Empty
/dev/mmcblk1p3 0 - 0 0 0 Empty
/dev/mmcblk1p4 0 - 0 0 0 Empty
Successfully wrote the new partition table
Re-reading the partition table ...
If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(See fdisk(8).)
mkfs.ext4 /dev/mmcblk1p1 -L BEAGLEBONE
-----------------------------
mke2fs 1.42.5 (29-Jul-2012)
Discarding device blocks: done
Filesystem label=BEAGLEBONE
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
117360 inodes, 468736 blocks
23436 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=482344960
15 block groups
32768 blocks per group, 32768 fragments per group
7824 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912
Allocating group tables: done
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done
-----------------------------
Formatting: /dev/mmcblk1 complete
-----------------------------
Copying: /dev/mmcblk0p1 -> /dev/mmcblk1p1
[ 57.765397] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
rsync: / -> /tmp/rootfs/
Copying: Kernel modules
rsync: /lib/modules/3.8.13-bone79/ -> /tmp/rootfs/lib/modules/3.8.13-bone79/
Copying: /dev/mmcblk0p1 -> /dev/mmcblk1p1 complete
-----------------------------
Final System Tweaks:
UUID=ad0e6574-3d98-415b-afcb-14240556f7c6
Generating: /etc/fstab
# /etc/fstab: static file system information.
#
UUID=ad0e6574-3d98-415b-afcb-14240556f7c6 / ext4 noatime,errors=remount-ro 0 1
debugfs /sys/kernel/debug debugfs defaults 0 0
/boot/uEnv.txt: disabling eMMC flasher script
#Docs: http://elinux.org/Beagleboard:U-boot_partitioning_layout_2.0
uname_r=3.8.13-bone79
##uuid=
#dtb=
##BeagleBone Black/Green dtb's for v4.1.x (BeagleBone White just works..)
##BeagleBone Black: HDMI (Audio/Video) disabled:
#dtb=am335x-boneblack-emmc-overlay.dtb
##BeagleBone Black: eMMC disabled:
#dtb=am335x-boneblack-hdmi-overlay.dtb
##BeagleBone Black: HDMI Audio/eMMC disabled:
#dtb=am335x-boneblack-nhdmi-overlay.dtb
##BeagleBone Black: HDMI (Audio/Video)/eMMC disabled:
#dtb=am335x-boneblack-overlay.dtb
##BeagleBone Black: wl1835
#dtb=am335x-boneblack-wl1835mod.dtb
##BeagleBone Black: replicape
#dtb=am335x-boneblack-replicape.dtb
##BeagleBone Green: eMMC disabled
#dtb=am335x-bonegreen-overlay.dtb
cmdline=coherent_pool=1M quiet init=/lib/systemd/systemd cape_universal=enable
#In the event of edid real failures, uncomment this next line:
#cmdline=coherent_pool=1M quiet init=/lib/systemd/systemd cape_universal=enable video=HDMI-A-1:1024x768@60e
##Example v3.8.x
#cape_disable=capemgr.disable_partno=
#cape_enable=capemgr.enable_partno=
##Example v4.1.x
#cape_disable=bone_capemgr.disable_partno=
#cape_enable=bone_capemgr.enable_partno=
##Disable HDMI/eMMC (v3.8.x)
#cape_disable=capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN,BB-BONE-EMMC-2G
##Disable HDMI (v3.8.x)
#cape_disable=capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN
##Disable eMMC (v3.8.x)
#cape_disable=capemgr.disable_partno=BB-BONE-EMMC-2G
##Audio Cape (needs HDMI Audio disabled) (v3.8.x)
#cape_disable=capemgr.disable_partno=BB-BONELT-HDMI
#cape_enable=capemgr.enable_partno=BB-BONE-AUDI-02
##enable Generic eMMC Flasher:
#cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh
uuid=ad0e6574-3d98-415b-afcb-14240556f7c6
-----------------------------
Syncing: /dev/mmcblk1
/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh: line 354: 229 Terminated cylon_leds
100000+0 records in
100000+0 records out
51200000 bytes (51 MB) copied, 2.96668 s, 17.3 MB/s
Syncing: /dev/mmcblk1 complete
-----------------------------
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,relatime,size=10240k,nr_inodes=63191,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620)
tmpfs on /run type tmpfs (rw,nosuid,relatime,size=101668k,mode=755)
/dev/mmcblk0p1 on / type ext4 (ro,relatime,data=ordered)
eMMC has been flashed: please wait for device to power down.
-----------------------------
INIT: version 2.88 booting
[info] Using makefile-style concurrent boot in runlevel S.
[....] Starting the hotplug events dispatcher: udevd[ 129.108269] udevd[1479]: starting version 175
. ok
[ ok ] Synthesizing the initial hotplug events...done.
[....] Waiting for /dev to be fully populated...[ 129.662248] omap_rng 48310000.rng: base address of priv is -97452032
[ 129.742314] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20
done.
[ ok ] Activating swap...done.
[ 131.399306] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
[....] Checking root file system...fsck from util-linux 2.20.1
rootfs: clean, 13178/108864 files, 62965/434944 blocks
done.
[ 131.565007] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
[ 131.927918] usbcore: registered new interface driver rt2870
[info] Loading kernel module mt7601Usta.
[ ok ] Cleaning up temporary files... /tmp.
[ ok ] Activating lvm and md swap...done.
[....] Checking file systems...fsck from util-linux 2.20.1
done.
[ ok ] Mounting local filesystems...done.
[ ok ] Activating swapfile swap...done.
[ ok ] Cleaning up temporary files....
[ ok ] Setting kernel variables ...done.
[....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2
Copyright 2004-2011 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
[ 135.788973] net eth0: initializing cpsw version 1.12 (0)
[ 135.799239] net eth0: phy found : id is : 0x7c0f1
[ 135.806502] libphy: PHY 4a101000.mdio:01 not found
[ 135.813818] net eth0: phy 4a101000.mdio:01 not found on slave 1
[ 135.828305] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Listening on LPF/eth0/1c:ba:8c:f1:c9:bf
Sending on LPF/eth0/1c:ba:8c:f1:c9:bf
Sending on Socket/fallback
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12
[ 192.391558] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
[ 192.400083] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPOFFER from 192.168.0.1
DHCPACK from 192.168.0.1
bound to 192.168.0.36 -- renewal in 38997 seconds.
done.
[ ok ] Cleaning up temporary files....
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
Fri Oct 30 15:50:00 UTC 2015
[ ok ] Starting enhanced syslogd: rsyslogd.
[ ok ] Starting periodic command scheduler: cron.
[ ok ] Starting system message bus: dbus.
INIT: Sending processes the TERM signal
[info] Using makefile-style concurrent boot in runlevel 0.
udhcpd: Disabled. Edit /etc/default/udhcpd to enable it.
[ ok ] Asking all remaining processes to terminate...done.
[ ok ] All processes ended within 1 seconds...done.
[ ok ] Stopping enhanced syslogd: rsyslogd.
[info] Saving the system clock.
[....] Deconfiguring network interfaces...Internet Systems Consortium DHCP Client 4.2.2
Copyright 2004-2011 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Listening on LPF/eth0/1c:ba:8c:f1:c9:bf
Sending on LPF/eth0/1c:ba:8c:f1:c9:bf
Sending on Socket/fallback
DHCPRELEASE on eth0 to 192.168.0.1 port 67
done.
[info] Hardware Clock updated to Fri Oct 30 15:50:04 UTC 2015.
[ ok ] Deactivating swap...done.
[ 200.760350] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
[info] Will now halt.
[ 202.853615] (NULL device *): gadget not registered.
[ 202.862127] Disabling non-boot CPUs ...
[ 202.868560] Power down.
[ 202.873473] System will go to power_off state in approx. 2 secs
Tom's Computer Info / [email protected]